Elenos FM Transmitters

FM Transmitters

ETG Indium Low Power Series – 150W to 2000W

 

The transmitters in this product line are available in 5 different power levels 150W, 500W, 1000W, 1500W and 2000W.

These products combine ultra high efficiency, high reliability and low energy consumption in a sleek, 2RU high, compact rack mountable unit.

 

The 2U line maximizes the concepts of energy efficiency, compactness and reliability that have steered the design over the past ten years.

 

All the transmitters in this line are extremely compact and light, which makes for greater ease in their installation and lower transportation costs.

 

Their high energy efficiency also allows for a considerably lower operating cost.

 

The line is also characterized by extremely high reliability and the ability to ensure high performance even under extreme operating conditions due to intelligent safety protocols, Icefet technology, and Lifextender algorithms.

 

HIGH EFFICIENCY

Extremely low-power consumption and reduced operating costs.

 

SMART FUNCTIONS/SYNAPTIC FUNCTIONS

Extraordinary performance level through the use of powerful operational algorithms and inter-module communications within the transmitter. These software algorithms adapt the transmitter to environmental conditions or to any connected device, preventing poor RF operation or diminished audio quality.

 

VERY COMPACT SIZE AND CONDENSED POWER

Two rack units in height, with a weight of less than 14 kilograms (30.8 lbs), unmatched power versus volume and power versus weight ratio.

 

PLANAR TECHNOLOGY

Exceptional stability, repeatability, reliability and ease of maintenance through the use of planar technology within the entire RF section (RF modules, combiners, splitter and low-pass filter). This allows for the minimization of internal connections and soldering, which increases the long term operation and performance.

 

CONNECTED EVERYWHERE

The remote control and management features allow users to receive data and send instructions to the transmitter via several state-of-the-art communication channels — SMS, GPRS, TCP/IP and SNMP

ETG Indium Medium Power Series – 2.5kW to 5.0kW

 

The Elenos medium power transmitter product line includes models 2500W, 3500kW and 5000W.

 

It can come with an amplifier and integrated modulator (exciter) in the same chassis (4U), or with a separate ETG 2U series low power modulator (exciter) and an E 4U series amplifier. These products represent the most advanced technology in terms of electrical efficiency, compactness, reduced weight, ease of use, and diagnostics. Additionally, the technology in these products offers the most complete access to transmitter operating data, protection operation, and the ability to operate under severe environmental conditions while maintaining undiminished RF and audio specifications.

 

This product line has been designed to guarantee the maximum performance and operation while lowering operational costs through energy saving technology.

 

The ETG Indium 4U transmitters achieve levels of overall electrical efficiency unseen in the market today, while also providing an extremely high operational performance under extreme environmental conditions (high external temperatures, poorly adjusted antenna, fluctuations in the network).

 

How is this possible? Mainly due to innovative techniques in RF design, intelligent power supplies, and through the use of powerful algorithms designed for optimal performance management.

 

The great efficiency of the RF amplifiers, modulator, and power supplies has also allowed a noticeable reduction of operating temperature, system weight and size.

 

The resulting advantages are substantial: easier installation and lowered transportation, rack space and energy costs.

 

Each of the transmitters in this product line provide accurate real-time operating data, thus allowing the user a precise status of the equipment operation in order to easily identify possible problems, either through a local user interface or via remote devices.

 

The user can receive data and send instructions to the transmitter via several communication channels — SMS, GPRS, TCP/IP and SNMP.

 

SMART DESIGN

Ultra compact size, light weight, clean layout, ease of maintenance and repair.

 

LOW ENERGY CONSUMPTION

 

Highly reduced energy consumption and significantly lowered operating costs due to state of the art nature of the design.

 

RELIABILITY

 

Extremely high reliability and the ability to ensure continuity of the service even under extreme operating conditions due to intelligent safety protocols, Icefet technology, and Lifextender algorithms.

 

TOTAL CONTROL

 

Accurate and detailed real time data on the operating status of the transmitter, available at the analytical level, (voltage, current, power, temperature, efficiency, safety, settings, audio levels, communications). Local and remote management and control via Serial Protocol, SMS, GPRS, SNMP, WEB.via Serial Protocol.

 

SCALABILITY

All products are designed to be scalable with the greatest advantage that any technological improvement affecting the base product is directly transferred to all equipment in the product family via upgrades.

 

LOWER COST OF OWNERSHIP

The cost savings due to the compact size of the equipment, planar technology and other features make this series a most competitive value for both large and small networks and radio operators.

ETG Indium High Power Series – 5.0kW to 30.0 kW

 

The ET Indium high power product family consists of FM transmitters in which the high power output is obtained through the combination of a suitable number of E 4RU medium power amplifiers (2500 – 5000 W.), a single ETG 2RU or dual set of 2 ETG 2RU modulators (Exciters) and a combiner for the power amplifiers. The overall RF power of the models in this product series ranges from 5 KW to 30 KW and each system can be housed in a single 19” rack.

 

These products represent the most advanced technology in terms of electrical efficiency, compactness, reduced weight, ease of use, and diagnostics. Additionally, the technology in the Elenos High Power Transmitter Line offers the most complete access to transmitter operating data, protection operation, and the ability to operate under severe environmental conditions while maintaining undiminished RF and audio specifications.

 

This product line has been designed to guarantee the maximum performance and operation while lowering operational costs through energy saving technology.

 

The ET Indium High Power transmitters achieve levels of overall electrical efficiency unseen in the market today, while also providing an extremely high operational performance under extreme environmental conditions (high external temperatures, poorly adjusted antenna, fluctuations in the network).

 

The great efficiency of the RF amplifiers, modulator, combiner and power supplies has also allowed a noticeable reduction in operating temperature, system weight and size. The resulting advantages are substantial: easier installation, and lowered transportation, rack space and energy costs.

 

How is this possible? Mainly due to innovative techniques in RF design, intelligent power supplies, and through the use of powerful algorithms designed for optimal performance management.

SMART DESIGN

Ultra compact size, light weight, clean layout, ease of maintenance and repair.

 

LOW ENERGY CONSUMPTION

Highly reduced energy consumption and significantly lowered operating costs due to state of the art nature of the design.

 

RELIABILITY

Extremely high reliability and the ability to ensure continuity of the service even under extreme operating conditions due to intelligent safety protocols, Icefet technology, and Lifextender algorithms.

 

TOTAL CONTROL

Accurate and detailed real time data on the operating status of the transmitter, available at the analytical level, (voltage, current, power, temperature, efficiency, safety, settings, audio levels, communications.) Local and remote management and control via Sereial Protocol, SMS, GPRS, SNMP, WEB.

 

SCALABILITY

All products are designed to be scalable with the greatest advantage that any technological improvement affecting the base product is directly transferred to all equipment in the product family via upgrades.

 

Fynder Electronics

Hverafold 21, IS-112 Reykjavik, Iceland - Web: www,fynder.eu - Email: info@fynder.eu - Tel: +354 8926374

 

CUSTOMERS SAY

 

“Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nullam tincidunt viverra diam”

 

Bob, Westside Brox